Bridge Fiber and Copper Networks Without Complexity
If you need a straightforward way to connect a remote device over fiber without replacing existing copper infrastructure, this media converter from fiber to Ethernet is exactly what you are looking for. The CF101 takes a 100Base-FX optical signal and converts it to a standard 10/100Base-TX RJ45 port – no configuration, no software, no extra power adapters. Just plug in your SC fiber patch cable and an Ethernet cable, and the link is up.
This unmanaged converter is built for IT managers and network engineers who value stability and low downtime. The metal enclosure dissipates heat naturally, so the unit keeps running even when deployed in a dusty electrical cabinet or an unventilated telecom closet. It supports full/half duplex auto-negotiation and auto MDI/MDI-X, so you don’t have to worry about crossover cables or pin assignments. For example, you can attach it to a camera at the far end of a factory floor or to an access point in a warehouse – the distance limit jumps from 100 meters (copper) to 120 kilometers over single-mode fiber.
The device handles large packets (up to 2048 bytes) which is useful for surveillance video streams or large file transfers. Power consumption stays under 3W, meaning this converter runs cool and wont add noticeable cost to your electricity bill even if left on 24/7. It works with both multi-mode and single-mode fiber, at wavelengths of 850nm, 1310nm, 1550nm, or 1490nm, depending on the SFP module or fixed optics you choose (SC/FC/ST connector types available).
- Extend your network beyond the 100-meter copper limit using existing fiber lines
- No configuration needed – true plug-and-play for rapid deployment
- Metal housing with natural heat dissipation ensures long-term reliability in harsh environments
- Supports 2K MAC addresses and 768Kbit buffer for smooth data flow
Whether you are linking two office floors, connecting a remote security camera, or connecting a distant sensor array, this media converter from fiber to Ethernet gives you a simple, cost‑effective bridge. It is especially popular among small and medium businesses that need to upgrade to fiber without swapping out all their copper devices.
