Industrial Ethernet Connectivity for Harsh Field Networks
The IES300-8E2F is an Unmanaged 8 Port Gigabit Industrial Ethernet Switch with 2 SC Fiber Ports, designed for industrial sites where standard office switches may not cope with temperature changes, electrical noise, or limited installation space. It provides eight 10/100/1000Base-T RJ45 ports for local devices and two 1000Base-X SC fiber ports for longer-distance links between control cabinets, workshops, buildings, or roadside equipment.
For maintenance teams, the setup is straightforward. Connect the copper devices, install the fiber uplinks, apply DC power, and the switch starts forwarding traffic without software configuration. Auto-negotiation selects the appropriate 10Mbps, 100Mbps, or Gigabit Ethernet rate on each RJ45 port. Auto MDI/MDI-X also removes the need to check cable type during installation, which is useful when replacing equipment in a working cabinet.
Stable Performance Where Cable Distance Matters
Copper Ethernet remains limited to 100 meters, while the fiber ports extend the network much farther. Depending on the selected optical transceiver and fiber type, the link can support multimode distances of 550 meters or 2 kilometers, or single-mode distances from 2 kilometers up to 100 kilometers. This makes the switch suitable for plant-floor networks, traffic control cabinets, building automation links, and monitoring systems spread across separate areas.
The switch uses store-and-forward switching with a 20Gbps switching bandwidth and a 14.88Mpps forwarding rate. Line-speed forwarding on the RJ45 ports helps keep traffic moving smoothly when several cameras, controllers, access devices, or industrial computers share the same network segment. A 16K MAC address table and 10K jumbo frame support also give network planners useful capacity for larger industrial communication environments.
Built for Cabinets, Control Rooms, and Outdoor Enclosures
Industrial deployment often means dealing with heat, cold, dust, induced surges, and unstable power conditions. The IES300-8E2F operates from -45°C to +85°C and uses a fanless metal housing with natural cooling. With no fan to collect dust or wear out, it can run quietly in control panels, small machine rooms, and roadside cabinets. Its IP40 enclosure, high-strength corrugated metal case, and IEC Class A electromagnetic protection support dependable operation in electrically demanding locations.
Dual redundant DC inputs accept 12V to 58V and help keep the network online when one power source or cable path is interrupted. Overload protection and reverse-polarity protection reduce the risk of wiring mistakes during installation or service. Built-in protection against surge, electrostatic discharge, and electrical fast transients adds another layer of protection for connected field equipment. The typical power consumption is below 5W, helping limit heat buildup and ongoing operating cost in enclosed cabinets.
A Practical Choice for Industrial Network Expansion
This DIN-rail industrial Gigabit switch fits projects that need more ports without adding configuration overhead. It is a practical option for PLC and controller networks, IP surveillance backbones, road and tunnel monitoring, building automation, security systems, and small industrial control rooms. Status LEDs provide a quick view of link activity, port speed, fiber connection, and power condition, so technicians can check basic network health without connecting a laptop.
As an unmanaged industrial Ethernet switch, the IES300-8E2F does not provide VLAN, QoS, or remote management functions. That keeps deployment simple for isolated or already-managed network segments. For buyers and system integrators looking for an 8 Port Gigabit Industrial Ethernet Switch with 2 SC Fiber Ports, the model combines long-distance fiber connectivity, wide-temperature operation, redundant DC power, and compact DIN-rail installation in one field-ready unit.
