Extend Your Network with a Reliable 4 Port PoE Ethernet to Media Converter
If you’re managing a small office, retail store, or surveillance system that needs both PoE power and fiber backbone connectivity, this unmanaged 4 port PoE Ethernet to media converter is built for the job. It combines four gigabit PoE ports (af/at, up to 25.4W each) with two 1.25Gbps SC fiber uplinks – letting you run power and data over copper to cameras or access points, while linking back to a central switch via fiber over distances up to 100km (single-mode). No software setup, no VLAN config, no IT degree required: plug in your devices, connect the fiber, and it’s live.
Unlike a standard PoE switch, this unit acts as a media converter first – bridging twisted-pair Ethernet and optical fiber transparently. The built-in auto-negotiation on all copper ports handles speed (10/100/1000M) and duplex, and the store‑and‑forward switching keeps jitter low for video streams. The metal chassis dissipates heat passively (no fan means zero noise in a meeting room or corridor). For IT admins and system integrators deploying IP cameras in hotels, supermarkets, or warehouses, this converter eliminates the need for a separate injector and a media converter – it’s one compact box that does both.
Key practical advantages: the fiber port supports single‑mode SC (options for FC or SFP via special order) with transmission lengths from 2 to 100km, so you can place the converter far from your main rack without signal loss. The PoE budget is per port – max 25.4W each, enough for PTZ cameras or Wi‑Fi 6 access points. And because it’s unmanaged, there’s no IP address to forget, no console cable to lose – just a green PWR LED that tells you everything is working.
