Fiber to Ethernet Media Converter with PoE – Simple, Reliable, Ready
If you need to extend your network across long distances while powering IP cameras or access points over the same cable, this fiber to ethernet media converter with poe is exactly what you’re looking for. It’s not a complicated switch – it’s a straightforward device that takes a fiber optic signal and converts it to 4 standard Ethernet ports, each delivering up to 25.4W of IEEE 802.3af/at PoE. No configuration, no IT degree required. Just plug in your fiber patch cable from your core switch or optical line terminal, connect your PoE devices to the RJ45 ports, and you’re live.
The metal housing keeps it cool naturally – no fan noise, no dust intake. That matters when you install it in a telecom closet, above a drop ceiling, or on a wall in a warehouse. The unit operates from -20°C to +60°C, so it won’t quit on you during a summer heat wave or a freezing night. And because it’s a dedicated fiber to ethernet media converter with poe, you get the distance of single‑mode fiber (up to 100 km) with the convenience of PoE at the endpoint. That’s a big deal for video surveillance in parking lots, perimeter fences, or remote offices where power outlets are scarce.
Who uses this? Small to medium‑sized businesses, hotels, retail chains, and system integrators who need a cost‑effective way to connect PoE cameras or Wi‑Fi 6 access points back to a central fiber backbone. It’s also a solid choice for extending Ethernet to a detached building or a workshop without running copper beyond 100 meters. The plug‑and‑play nature means you can deploy it in minutes, and the 4‑port density covers most small clusters without wasting unused ports.
Key highlights:
- 4× 10/100Base‑TX PoE ports, total PoE budget limited by external 48‑53V power supply
- 1× 100Base‑X SC single‑mode fiber port (SC/FC/SFP options available)
- Auto‑negotiation and MDI/MDI‑X on all RJ45 ports – no crossover cables needed
- Store‑and‑forward switching with 1.0 Gbps backplane, 2K MAC table
- Metal enclosure, fanless, natural cooling for silent 24/7 operation
Bottom line: if your project calls for a reliable fiber to ethernet media converter with poe that doesn’t add complexity, pick this one. It does one job well: bridging fiber to PoE‑powered Ethernet devices.
