Stable Fiber Networking for Industrial Sites
The IES100-2E2F is an Unmanaged 2 Port Fast Ethernet Industrial Switch with 2 SC Fiber Ports, built for network links that must keep working in control cabinets, roadside enclosures, plant floors, and remote monitoring points. It converts data between two 10/100Base-TX copper ports and two 100Base-X SC fiber ports, making it practical when standard Ethernet cable cannot cover the required distance or the installation area has high electrical noise.
This 2 Port Fast Ethernet Industrial Switch with 2 SC Fiber Ports uses store-and-forward switching to check and forward packets in an orderly way. The 1.2 Gbps switching bandwidth and wire-speed forwarding help keep ordinary automation traffic, control data, and monitoring streams moving without adding unnecessary network complexity. Since the switch is unmanaged, there is no IP address, web interface, or software setup to maintain. Connect the copper and fiber cables, apply power, and the link is ready to use.
Built for Practical Field Deployment
Industrial networks often face problems that office switches do not: unstable power, temperature swings, induced surges, dust, vibration, and limited cabinet space. The IES100-2E2F addresses these conditions with a fanless metal housing, IP40 protection, natural cooling, and a wide operating temperature range from -40°C to +85°C. The compact DIN-Rail format fits neatly inside control panels and distribution boxes, while the fanless design removes a common failure and maintenance point.
Its dual redundant DC power input accepts 12 to 58 VDC. If one power source or supply path fails, the second input can keep the switch online, which is useful for traffic cabinets, factory control systems, and other sites where a short network interruption can affect operations. Reverse-polarity and overload protection also reduce the risk of wiring mistakes during installation or service work. Imported surge protection components and IEC Class A EMC protection help the switch handle electrical interference and induced high voltage in demanding environments.
Fiber Reach Without Complicated Configuration
The two SC fiber ports support multimode or single-mode options according to the selected optical specification. Multimode links can cover up to 550 m or 2 km, while single-mode versions can support distances from 2 km to 100 km. This makes the switch suitable for connecting production areas, substations, roadside equipment, building automation nodes, and remote data collection points. The copper ports support 10/100 Mbps auto-negotiation, half/full-duplex auto-negotiation, and auto MDI/MDI-X, so installers do not need to match cable type manually.
For IT administrators and system integrators, the main value is straightforward deployment. There is no VLAN, QoS, or remote management function to configure, but there is also no configuration overhead for a small point-to-point or local fiber extension. LED indicators provide a quick view of power, copper link/activity, and fiber status during commissioning and troubleshooting. With power consumption below 5 W, the switch creates little heat inside a cabinet and keeps long-term operating costs under control.
Where It Fits
Use this industrial fiber Ethernet switch for industrial automation control, traffic control systems, building automation, IP monitoring links, factory floor networking, and small industrial data center extensions. It is a good fit when a project needs two local copper connections and two SC fiber connections, but does not require network management or PoE power delivery. The three-year warranty and rated MTBF of 100,000 hours provide practical support for long-term deployment, while the rugged DIN-Rail design keeps installation and replacement simple for maintenance teams.
