Industrial Ethernet Connectivity for Harsh Site Conditions
The IES100-8E1F is an unmanaged 8 Port Industrial Ethernet Switch with 1 SC Fiber Uplink Port, built for control cabinets, roadside enclosures, plant floors, and other locations where office-grade networking equipment is not a good fit. It connects up to eight copper Ethernet devices through 10/100Base-TX ports and sends traffic over a 100Base-X SC fiber link. This makes it practical for extending a local industrial network beyond the 100-meter limit of copper cabling while keeping the installation straightforward.
For maintenance teams, the main benefit is simple deployment. The switch uses plug-and-play operation, so there is no web interface, IP setup, or software configuration before the network can go live. Each RJ45 port automatically negotiates 10 or 100 Mbps, half or full duplex, and MDI/MDI-X. Installers can connect PLCs, HMIs, industrial PCs, access controllers, or monitoring equipment without spending time checking cable pinouts or manually setting port parameters.
Stable Transmission with Practical Industrial Protection
The 8 Port Industrial Ethernet Switch with 1 SC Fiber Uplink Port uses store-and-forward switching and wire-speed forwarding to move normal control, monitoring, and automation traffic smoothly. Its 2.0 Gbps switching bandwidth, 1.488 Mpps forwarding rate, 2K MAC address table, and 512K packet buffer provide enough capacity for small industrial Ethernet segments and distributed monitoring points. A 10K jumbo frame support also helps when compatible equipment needs to pass larger Ethernet frames.
Fiber provides electrical isolation between network areas and helps reduce the effect of ground potential differences and electromagnetic noise. The fixed SC uplink is suited to common industrial fiber installations, while the available fiber distance depends on the selected transceiver and cable type. Multimode links can reach up to 2 km, while single-mode options support distances from 2 km to 100 km. Confirm the optical specification before ordering when the project requires a particular wavelength or transmission distance.
Power reliability is handled with dual redundant DC inputs from 12 V to 58 V. If one power source or circuit is interrupted, the second input can keep the switch online, which is useful for traffic cabinets, factory control systems, and remote monitoring sites. Reverse-polarity and overload protection help reduce the risk of wiring mistakes during field installation. The metal housing, fanless natural cooling, IP40 protection, and low power consumption below 5 W also reduce routine maintenance and avoid adding another fan to a dusty cabinet.
Made for Unattended Network Operation
The switch operates from -40°C to +85°C and is designed to handle vibration, shock, electrostatic discharge, electrical fast transients, and surge conditions when the applicable protection option is selected. Imported surge protection components help protect against induced high voltage and transient events; however, the switch should still be installed with proper grounding and site-level surge protection. IEC Class A EMC protection supports cleaner operation near industrial equipment and power circuits.
This unmanaged industrial Ethernet switch is a good fit for OEM machine builders, system integrators, IT administrators, and plant maintenance teams that need dependable Fast Ethernet connectivity without the cost or training burden of a managed switch. Typical applications include industrial automation control, traffic control systems, building automation, IP monitoring, access control, and data center environmental monitoring. DIN-rail mounting allows the unit to sit neatly inside a control cabinet, while LED indicators provide a quick view of power, link, and activity status during commissioning or fault checks.
