PoE Media Converters

Explore Wanglink’s PoE Media Converters category, featuring Gigabit PoE Media Converters, Industrial PoE Fiber Converters, and PoE+ Media Converters for IP cameras. Our factory-direct products deliver reliable power and data over Ethernet, ideal for security surveillance and industrial networking applications.

Explore All PoE Media Converters

Unmanaged Media Converter with PoE, 2 Ports Gigabit, 1 SC Fiber Port, Desktop/Wall Mount for IP Surveillance

A reliable unmanaged media converter with PoE that powers two 10/100/1000Mbps cameras or access points while extending links up to 100km over single-mode fiber. Plug-and-play, no setup needed.

CG102P
Port Description

1 x 1.25Gbps SC fiber port (supports single-mode up to 100km, multi-mode up to 2km) + 2 x 10/100/1000Mbps RJ45 PoE ports (IEEE 802.3af/at, up to 25.4W each)
  • 1 SC fiber port (1.25Gbps) extends network up to 100km – ideal for campus or multi-building links
  • 2 Gigabit PoE ports (af/at) deliver up to 25.4W each, powering cameras and APs without extra injectors
  • Auto-sensing PoE detection prevents damage to non-PoE devices
  • Plug-and-play – zero configuration, no software needed
  • Metal housing with fanless cooling for silent 24/7 operation
  • Wide temperature range (-20°C to 60°C) works in harsh environments









Extend Your Network with a Media Converter That Also Powers Remote Devices

If you’re setting up IP cameras, wireless access points, or VoIP phones in a location where copper Ethernet can’t reach far enough, this media converter with PoE is exactly what you need. It bridges the gap between fiber backbone and copper endpoints, delivering both data and power over a single cable. No extra power injectors, no messy wiring – just one compact box that handles conversion and power delivery.

Here’s how it works: the 1.25Gbps SC fiber port connects to your existing fiber network (or to another converter at the head end), while two Gigabit RJ45 ports auto-sense PoE devices and supply up to 25.4W per port per IEEE 802.3af/at. That’s enough to run most PTZ cameras or high-power Wi-Fi 6 access points. The unit automatically detects non-PoE equipment and won’t damage it, so you can mix devices safely.

Why choose this model over a standard fiber media converter? Because it saves you a power outlet and a separate PoE injector at the remote end. For example, in a grocery store parking lot surveillance project, you can run a single fiber from the back office to the pole, then drop a short Cat5e to the camera – the converter sits right there, powering the camera and converting the signal. That’s one less thing to fail and one less trip up a ladder.

Build quality matters too. The metal housing dissipates heat well, and the fanless design means zero noise – perfect for quiet office environments or hotel corridors. It works reliably in temperatures from -20°C to 60°C, so you can mount it in an unventilated closet or outdoors in a weatherproof box. Setup takes less than a minute: connect fiber, connect copper, plug in 48V DC, and you’re live.

This media converter with PoE is ideal for system integrators, IT administrators, and small business owners who need a dependable, low-maintenance way to extend both connectivity and power. Whether you’re upgrading an old coax CCTV system to IP, connecting a far corner of a warehouse, or adding Wi-Fi in a hotel lobby, this device handles it without fuss.

Standards & Protocols IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3af/at, 802.3x
Fiber Port 1x SC single-mode/multi-mode, 1.25Gbps
Fiber Distance Multi-mode: 550m/2km; Single-mode: 2/20/40/60/80/100km
RJ45 Ports 2x 10/100/1000Base-T, PoE af/at, auto-MDI/MDIX
PoE Output Per port: max 25.4W, total budget: 50.8W
Switching Capacity 6.0Gbps
Packet Forwarding Rate 4.464Mpps
MAC Table 2K
Buffer Memory 1M
Jumbo Frame 9K
Power Input DC 44-52V (suggested 48V/2A)
Power Consumption Min <3W, Max <60W (with full PoE load)
Operating Temperature -20°C to 60°C
Storage Temperature -20°C to 85°C
Humidity 5%–95% non-condensing
Weight <180g
LED Indicators PWR (green), FX (green), Link/ACT (green per RJ45), PoE (yellow per RJ45)


加载中…