Industrial PoE and Fiber Connectivity for Harsh Sites
The IES100-2P2F is an Unmanaged 2 Port Industrial PoE Switch with 2 SC Optical Fiber Ports, built for installations where ordinary office switches are not a good fit. It combines two 10/100Base-TX RJ45 ports with two 155 Mbps SC fiber ports, giving field devices both local copper access and a dependable long-distance fiber link. The design suits IP cameras, wireless access points, access control terminals, industrial controllers, and other Ethernet devices deployed outside a clean server room.
For a small road cabinet, production line, building control panel, or remote monitoring point, the switch keeps the network layout straightforward. The two RJ45 ports support IEEE 802.3af/at Standard PoE, with up to 25.4 W available per port. The switch checks whether a connected device supports PoE before applying power, helping protect non-PoE equipment from accidental connection damage. This is useful when installers need to connect cameras or access points in the field without adding a separate power injector at every endpoint.
Fiber Uplinks That Fit Long-Distance Deployments
The two SC optical fiber ports provide electrical isolation between network sections and help reduce the effect of ground potential differences, electromagnetic noise, and lightning-related interference. Depending on the selected optical option, the fiber link can cover up to 550 m or 2 km over multimode fiber, and from 2 km to 100 km over single-mode fiber. This makes the switch practical for traffic monitoring, factory floors, warehouses, campus buildings, and distributed control systems where copper cabling cannot reach the remote device.
Both copper ports automatically negotiate 10/100 Mbps, support half- or full-duplex operation, and handle MDI/MDI-X automatically. Store-and-forward switching, line-speed forwarding, a 1.2 Gbps switching bandwidth, and a 0.8928 Mpps forwarding rate keep ordinary control, monitoring, and access traffic moving without manual port configuration. The 2K MAC address table is suitable for small industrial network segments, while the 10K jumbo frame capability supports applications that require larger Ethernet frames.
Built for Practical Industrial Maintenance
Industrial networks often fail because of power interruptions, heat, dust, vibration, or wiring mistakes rather than because of complicated software. This switch uses dual redundant 44–58 V DC power inputs, overload protection, and reverse-polarity protection. If one DC source is interrupted, the second source can keep the unit online, reducing service calls at remote cabinets. The fanless metal housing uses natural cooling, so there is no fan to collect dust or become a routine replacement item. Power consumption remains below 5 W at minimum load, helping limit cabinet heat and long-term operating cost.
The operating range of -40°C to +85°C supports outdoor cabinets, roadside equipment boxes, and unconditioned industrial spaces. IP40 protection, IEC Class A EMC performance, static and pulse immunity, and optional surge protection add practical protection for electrically noisy sites. The DIN-Rail form factor and plug-and-play operation allow technicians to mount the unit, connect fiber, copper, PoE devices, and redundant power, then bring the link into service without software setup.
Where This Switch Fits
This 2 Port Industrial PoE Switch with 2 SC Optical Fiber Ports is a good choice for small, distributed Ethernet nodes rather than large office networks. It helps system integrators and maintenance teams build compact links for industrial automation, road traffic control, building automation, IP surveillance, and data center monitoring. For buyers who need a manageable installation, long-distance fiber transmission, PoE endpoint power, and stable operation across changing temperatures, the IES100-2P2F delivers the essential functions without adding configuration overhead.
