Industrial PoE Fiber Conversion for Remote Devices
The IMC100-2P1F is a 2 Port Industrial PoE Media Converter 10/100M to SC Optical Fiber, built for network links where standard office switches are not a good fit. It connects two 10/100Mbps Ethernet devices to a 100Base-X optical fiber uplink, extending data beyond the normal 100-meter copper limit and delivering power to compatible PoE equipment over the same network cable.
This setup is useful when an IP camera, wireless access point, industrial terminal, access controller, or other powered device is installed away from the main equipment room. Instead of running a separate power line and installing an additional PoE switch at the remote end, the converter carries both Ethernet data and PoE power through the RJ45 connection. The SC fiber port then links the remote cabinet, roadside box, production area, or building control point back to the network core.
Practical PoE and Fiber Connectivity
Both RJ45 Ethernet ports support IEEE 802.3af/at Standard PoE, with up to 25.4W available per port. The converter checks whether the connected device supports the required PoE standard before applying power, helping protect ordinary non-PoE equipment from accidental power delivery. Each copper port supports 10/100Mbps auto-negotiation, half/full-duplex adaptation, and automatic MDI/MDI-X, so technicians can connect common Cat3, Cat4, or Cat5 UTP cabling without worrying about cable type or manual settings.
The SC optical interface supports a range of multimode and single-mode fiber options. Depending on the selected optical module or version, transmission distances can range from 550 meters or 2 kilometers on multimode fiber to 2, 20, 40, 60, 80, or 100 kilometers on single-mode fiber. This makes the 10/100M to SC optical fiber converter suitable for both short building links and longer industrial or road network deployments. Confirm the required fiber mode, wavelength, and distance when ordering.
Built for Cabinets, Control Points, and Harsh Sites
Industrial networks are often installed in places with dust, vibration, temperature changes, electrical noise, and limited maintenance access. The metal enclosure, fanless natural cooling, IP40 protection, and DIN-Rail installation help the unit fit neatly inside control cabinets and outdoor communication boxes. Its -40°C to +85°C operating range supports deployment in unconditioned environments, while the low-power design reduces heat buildup inside compact enclosures.
Dual redundant DC power input allows the converter to remain connected to two independent power sources. Overload protection and reverse-polarity protection reduce common installation risks, particularly during field wiring or maintenance. Imported surge protection devices and EMC protection help the device handle induced voltage and electrical interference; optional surge protection specifications are available for projects with defined IEC test requirements.
Simple Deployment with Less Maintenance
This unmanaged industrial PoE media converter works without a web interface, license, or software configuration. Connect the fiber, copper devices, and DC power, then check the link, activity, PoE, fiber, and power indicators. Store-and-forward switching, line-speed forwarding, a 1.2Gbps switching bandwidth, and a 512K packet buffer keep ordinary 10/100Mbps traffic moving smoothly for monitoring, control, and access applications.
For network administrators and system integrators, the main benefit is straightforward installation and predictable operation. For small and medium-sized businesses, it avoids the cost and space of a separate remote PoE switch. Typical applications include industrial automation, road traffic control, building automation, IP surveillance, factory-floor monitoring, and data center auxiliary monitoring. With a 3-year warranty and a stated MTBF of 100,000 hours, the IMC100-2P1F is a practical choice for extending copper PoE connectivity over SC fiber in demanding sites.
