Industrial Fiber Networking for Harsh Sites
The IMC300-2E1F is an Unmanaged Industrial Gigabit Media Converter 2 RJ45 Ports to 1 SC Fiber, designed for installations where copper cabling needs to reach farther than the standard 100-meter Ethernet limit. It links two 10/100/1000Base-T devices with one 1000Base-X SC fiber connection, making it a practical fit for factory floors, traffic control cabinets, building automation systems, IP monitoring networks, and small industrial control rooms.
For an IT administrator or field engineer, the setup is straightforward: connect the copper devices, terminate the fiber link, and apply DC power. No web interface, IP address, or software configuration is required. The RJ45 ports automatically detect 10Mbps, 100Mbps, or 1000Mbps operation, while auto-negotiation, half/full-duplex adaptation, and auto MDI/MDI-X remove the usual cable-matching work during deployment. Store-and-forward switching checks incoming frames before forwarding them, helping keep traffic stable when network devices run at different speeds.
Built for Industrial Power and Temperature Conditions
Ordinary office media converters can become a weak point inside outdoor cabinets, production lines, or unconditioned equipment rooms. This industrial Gigabit media converter uses a metal housing, fanless natural cooling, and a -45°C to +85°C operating range. With no fan to replace or clean, the unit creates fewer maintenance tasks and avoids an additional mechanical failure point. Its IP40 housing, IEC Class A EMC protection, and tested surge, electrostatic, pulse, vibration, shock, and free-fall performance support dependable use around electrical equipment and industrial machinery.
The DC 12V to 58V input accepts the power ranges commonly found in control panels and transportation systems. Dual redundant power inputs allow a second supply to remain connected as a backup. Overload protection and reverse-polarity protection also reduce the risk of damage during cabinet wiring or service work. The power arrangement is especially useful where a network link must remain available during a single power-feed fault.
Long-Distance Fiber Extension Without Extra Management Work
The 1 SC fiber port supports 1000Base-X transmission for extending Ethernet between buildings, cabinets, floors, or remote field locations. Depending on the selected optical module and fiber type, the link can support multimode distances of up to 550m or 2km, and single-mode distances from 2km up to 100km. The two copper ports continue to provide standard Gigabit Ethernet access for PLC gateways, cameras, controllers, servers, or local switches.
A 10Gbps switching bandwidth, 7.44Mpps forwarding rate, 2K MAC address table, and support for jumbo frames up to 10K help the converter handle regular industrial Ethernet traffic without adding configuration overhead. Link and activity LEDs provide a quick view of copper and fiber status, which is useful when troubleshooting a remote cabinet. With power consumption below 5W and DIN-rail installation, the unit fits neatly into control panels while limiting heat buildup and cabinet space usage.
Practical Choice for Industrial Ethernet Expansion
This 2 RJ45 port to 1 SC fiber media converter suits system integrators, network maintenance teams, and small or medium-sized businesses that need a simple fiber uplink rather than a managed switch. It is a good match for surveillance backhaul, road and tunnel equipment, factory automation, building controls, and computer room monitoring. The three-year warranty and 300,000-hour MTBF provide additional support for long-term deployment planning, while the plug-and-play design keeps installation and replacement time short.
