Industrial Fiber Conversion for Harsh Network Sites
The IMC300-1E1F is an Unmanaged Industrial Gigabit Fiber Media Converter 1 RJ45 to 1 SC Port, designed for network links where standard office hardware may not hold up. It connects one copper Ethernet device to one Gigabit optical fiber link, making it a practical choice for extending industrial Ethernet beyond the 100-meter limit of copper cable. There is no software setup or management interface to deal with: connect the cables, apply power, and the link is ready.
For factory floors, traffic control cabinets, building automation panels, and remote monitoring points, the main concern is usually not adding more network features. It is keeping a small but important link online through temperature changes, electrical noise, dust, and unstable site conditions. This Industrial Gigabit Fiber Media Converter uses a metal enclosure, fanless natural cooling, and an industrial operating range of -45°C to +85°C. With no fan to collect dust or wear out, the unit is easier to maintain in cabinets and equipment rooms.
Simple Copper-to-Fiber Deployment
The copper side provides one 10/100/1000Base-T RJ45 port with automatic speed negotiation, half/full-duplex adaptation, and automatic MDI/MDI-X. Existing Ethernet devices can therefore connect without manual cable selection or port configuration. On the fiber side, the 1000Base-X SC interface supports multimode or single-mode options, with transmission distances from short multimode links up to 100 km single-mode deployments, depending on the selected optical module and fiber specification.
Store-and-forward switching checks each frame before forwarding it, helping reduce corrupted traffic across the link. Line-speed forwarding keeps data moving smoothly for common industrial applications such as PLC communications, access control, IP monitoring backhaul, and building management systems. The 10 Gbps switching bandwidth and 7.44 Mpps forwarding rate provide practical headroom for a one-copper-port fiber conversion point, while the 10K jumbo frame capability supports networks that carry larger data packets.
Built for Continuous Field Operation
Power reliability is often just as important as link distance. The converter accepts 12–58 VDC input and supports dual redundant power connection through a Phoenix terminal. Overload protection and reverse-polarity protection help reduce the risk of wiring mistakes during installation or maintenance. Imported surge protection devices provide protection against induced high voltage and common site surges, with specified IEC61000-4-5 protection at both the signal and power ends.
Its IP40 metal housing, IEC Class A EMC design, and tested resistance to electrostatic discharge, electrical fast transients, shock, vibration, and free fall make it suitable for control cabinets and distributed field enclosures. Power use stays below 5 W, which limits heat generation and helps control operating costs when many communication points are installed. A 300,000-hour MTBF and three-year warranty support long-term deployment planning for system integrators and maintenance teams.
Who Should Use This Converter?
This 1 RJ45 to 1 SC fiber media converter fits installers and network administrators who need a dependable point-to-point fiber link without VLAN, routing, or remote management functions. It is well suited to industrial automation, road traffic control, building automation, computer room monitoring, and small remote cabinets. The DIN-rail form factor saves panel space, while the plug-and-play design keeps commissioning time short. Choose the correct SC, FC, or SFP variant and optical distance for the project; the standard configuration described here uses one SC fiber port.
