Industrial PoE Media Conversion for Remote Equipment
When a camera, access point, intercom, or other field device is located beyond the practical reach of copper cabling, the IMC100-1P1F provides a straightforward way to extend the connection over fiber. This unmanaged industrial PoE media converter combines 1 x 10/100Base-TX RJ45 port with 1 x 100Base-X SC fiber port. The RJ45 port carries data and supplies power, while the fiber link connects the remote device to a control cabinet, distribution switch, or central monitoring system.
As an Industrial PoE Media Converter 1 Port 10/100M RJ45 to 1 SC Fiber, it fits projects that need one powered copper endpoint and a longer, electrically isolated uplink. The unit supports IEEE 802.3af/at PoE and provides up to 25.4 W on the RJ45 port. It checks whether the connected device supports standard PoE before applying power, helping prevent accidental damage when a non-PoE device is connected. For installers, this means fewer separate power arrangements at the field end and a cleaner deployment around cameras, sensors, and access-control equipment.
Built for Cabinets, Roadsides, and Factory Floors
Industrial sites rarely offer a clean office environment. Temperature swings, electrical noise, vibration, and limited cabinet space can all affect network uptime. The converter uses a fanless metal housing and natural cooling, so there is no fan to collect dust or fail during long unattended operation. Its DIN-rail form makes it easy to place inside a control cabinet, traffic signal box, building automation panel, or small machine enclosure.
The operating temperature range of -40°C to +85°C supports outdoor and industrial installations where standard office media converters may not be suitable. Dual redundant DC power inputs allow the system designer to connect two independent power sources. Overload protection and reverse-polarity protection add practical safeguards during installation and maintenance. Imported surge protection devices and EMC protection help the link handle common industrial interference and induced surges; optional surge specifications are available for projects that require a defined test level.
Simple Deployment with Less Maintenance
This is an unmanaged device, so there is no IP address, software setup, or configuration workflow to maintain. Connect the fiber, plug in the Ethernet cable, and apply DC power. Auto-negotiation, auto MDI/MDI-X, and half/full-duplex adaptation take care of routine link matching. Store-and-forward switching with line-rate forwarding keeps small industrial networks responsive for monitoring traffic and control data.
The compact enclosure measures 139 × 108 × 50 mm and weighs less than 0.6 kg. Power consumption remains below 5 W at minimum load and below 30 W at maximum load, which helps limit cabinet heat and operating cost. LED indicators show power, fiber link, Ethernet activity, and PoE status, allowing technicians to check the connection at a glance without connecting a laptop.
Where It Fits
The Industrial PoE Media Converter 1 Port 10/100M RJ45 to 1 SC Fiber is a practical choice for IP surveillance, road traffic control, industrial automation, building automation, access control, and remote equipment monitoring. It is suited to system integrators, network installers, facility teams, and small businesses that need a dependable fiber-to-copper PoE connection without the cost or complexity of a managed switch. Select the appropriate multimode or single-mode SC fiber version and transmission distance for the project; available fiber options support links from short cabinet runs to long remote-site connections.
