Extend your IP camera deployment without extra outlets or signal loss
If you’ve ever had a PoE IP camera that’s just a few meters too far from the switch, or needed to add another camera where there’s no power nearby — this unmanaged PoE extender for IP camera is exactly what you need. It takes a single PoE input from your existing network (802.3af/at) and delivers three independent PoE outputs, each capable of powering and connecting a standard IP camera or wireless access point. No separate power supply needed, no extra cabling work.
The device works as a store-and-forward switch, so bandwidth is shared fairly among the three downstream ports. All four ports (one uplink, three downlink) run at 10/100Mbps with auto-negotiation, which is plenty for most 1080p or even 2K IP cameras. The metal enclosure helps with heat dissipation — a real plus when the unit is placed in a ceiling plenum or a cramped junction box. And because it’s completely plug-and-play, anyone on your maintenance team can install it in under two minutes.
Typical use cases include extending a PoE camera run beyond the 100-meter Ethernet limit (by daisy-chaining multiple extenders), adding a camera to a retail store’s security system without running new cable from the central switch, or powering a small cluster of outdoor cameras in a warehouse. The PoE extender for IP camera also supports surge protection up to 2kV on all ports, which adds a layer of safety for outdoor or industrial installations.
