Built for real surveillance jobs – the 4 port PoE gigabit switch that actually handles high-power cameras
You’ve probably dealt with PoE switches that struggle to power PTZ cameras or long-distance runs. This 4 port PoE gigabit switch (SG422P-DPM) changes that. Port 1 delivers a full 60W – enough for the latest high-draw PTZ or dome cameras – while ports 2-4 each give you 30W. Total PoE budget hits 120W, so you can run four power-hungry devices without worrying about overload. And because it’s a true gigabit switch (all ports negotiate at 10/100/1000 Mbps), your video streams won’t get bottlenecked.
The real kicker? The hardware toggle for VLAN mode. Flip it, and ports 1-4 are isolated from each other but still talk to the uplink ports. That kills broadcast storms dead – a common headache in flat surveillance networks. There’s also a 10M extend mode that pushes PoE and data up to 250 meters over Cat5e, saving you from pulling extra cable or adding extenders. Plus, the AI_PoE mode automatically reboots stuck IP cameras, which every installer will appreciate.
We made the physical design with IT staff in mind: metal housing with internal power supply, no noisy fans, and natural heat dissipation that keeps it running stable from -20°C to 60°C. Surge protection (6kV common/differential mode) on every Ethernet port means fewer field failures in outdoor or warehouse deployments. And since it’s completely unmanaged – just plug in and it works – you can hand it to a junior tech without any configuration.
Who should buy this 4 port PoE gigabit switch? Small to medium business owners setting up IP cameras in retail stores, hotels, or warehouses. IT admins needing a cost-effective drop for a handful of PoE endpoints. Residential installers pulling surveillance lines in apartment buildings or smart homes. If you need a reliable, low-hassle PoE switch that can handle 60W devices and long cable runs, this one’s worth a hard look.
