Industrial PoE Connectivity for Harsh Operating Sites
The IES100-8P1E is an 8 Port Industrial PoE Switch with 1 Uplink Port DIN Rail designed for IP surveillance, access control, traffic systems, building automation, and other installations where ordinary office switches may not be a good fit. It provides eight 10/100Base-TX PoE ports for powered devices and one additional 10/100Base-TX uplink port for connection to a network switch, router, NVR, or control cabinet network.
This is an unmanaged industrial PoE switch, so there is no web interface or software configuration to deal with. Connect the power, plug in the Ethernet cables, and the switch automatically negotiates the link rate and duplex mode. That simple setup helps installers bring remote cameras, wireless access points, intercoms, and other compatible devices online without sending a network engineer to every site.
Practical PoE for Cameras and Field Devices
Ports 1 to 8 support IEEE 802.3af/at Standard PoE, with up to 25.4 W available per port. The switch checks whether a connected device supports PoE before applying power, helping protect non-PoE equipment from accidental power delivery. For a small IP camera system, access-control panel, or industrial wireless node, this removes the need for separate local power adapters and reduces cable work inside the cabinet.
All nine Ethernet ports support 10/100 Mbps auto-negotiation, half/full-duplex adaptation, automatic MDI/MDI-X, and line-speed forwarding. The 2.0 Gbps switching bandwidth and store-and-forward architecture keep normal control, monitoring, and data traffic moving smoothly. A 2K MAC address table and 512K packet buffer provide practical capacity for compact industrial networks, while the 10K jumbo frame setting supports connected equipment that requires larger Ethernet frames.
Built for DIN Rail Cabinets and Outdoor-Adjacent Environments
Field equipment often faces temperature swings, electrical noise, vibration, and limited cabinet space. This DIN rail industrial PoE switch uses a corrugated metal housing, fanless natural cooling, and a wide operating temperature range of -40°C to +85°C. With no cooling fan, there is one less moving part to maintain and less dust pulled into the enclosure. The IP40 housing is suitable for protected control cabinets and indoor industrial locations; it is not intended to be exposed directly to rain or water.
Dual redundant DC power inputs support higher availability in control panels. Overload protection and reverse-polarity protection help reduce installation risk, while the 6-pin Phoenix terminal provides a firm connection for industrial wiring. Imported surge protection devices and IEC electromagnetic compatibility measures help the switch handle induced high voltage, static discharge, fast electrical transients, and common industrial interference. Surge ratings should be confirmed against the selected product configuration before deployment.
A Straightforward Choice for Industrial Network Expansion
For IT administrators, system integrators, and maintenance teams, the main benefit is predictable installation: mount the unit on a DIN rail, connect the redundant DC supply if required, link the uplink port to the control network, and connect PoE field devices. Status LEDs show power, Ethernet link/activity, and PoE operation, making cabinet-level troubleshooting faster. The compact 139 × 108 × 50 mm metal body also leaves room for wiring and adjacent DIN rail equipment.
Choose this 8 port industrial PoE switch when the network needs basic 10/100 connectivity, reliable PoE delivery, low maintenance, and operation across a wide temperature range. It fits small monitoring networks, roadside cabinets, factory automation lines, warehouse access systems, and building control installations where a managed feature set is unnecessary but stable industrial hardware matters.
