Get Connected

wanglink website home page

L3 managed switch

Managed 44-Port L3 Industrial Ethernet Fiber Switch with 4 SFP+ 10G Uplinks, 28 SFP Ports, Rack-Mount

Industrial Managed Switches

10G uplink switch, DIN rail switch, gigabit ethernet switch, industrial managed switch, industrial network switch, L3 managed switch

IS830-12E28F4F-60W

12×10/100/1000Base-T RJ45 ports, 28×100/1000Base-X SFP slots, and 4×1/10G SFP+ uplink slots, all supporting wire-speed forwarding.

  • 44-port design with 12 Gigabit RJ45, 28 Gigabit SFP, and 4 dual-rate 1/10G SFP+ ports.
  • 598 Gbps switching capacity and 119.04 Mpps wire-speed forwarding.
  • L3 static routing with IPv4/IPv6 management, VLAN, ACL, QoS, and link aggregation.
  • G.8032 ERPS recovery in less than 20 ms, plus STP, RSTP, and MSTP.
  • Dual 12 VDC inputs with reverse-polarity protection and automatic AC/DC changeover.
  • Operating temperature from -40°C to +80°C for demanding industrial locations.
  • Web, CLI, HTTPS, SSH, SNMP, LLDP, RMON, system log, and cable diagnosis support.
  • Galvanized steel 1U housing for desktop or 19-inch rack installation.

Managed 44-Port L3 Industrial Ethernet Fiber Switch with 4 SFP+ 10G Uplinks, 28 SFP Ports, Rack-Mount

Managed 12-Port L3 Industrial Ethernet Switch with 4 SFP+ 10G Uplink, Dual DC, DIN-Rail

Industrial Managed Switches

10G uplink switch, DIN rail switch, gigabit ethernet switch, industrial managed switch, industrial network switch, L3 managed switch

IS830-12E4F-B

12 × 10/100/1000Base-T RJ45 ports plus 4 × 1/10G SFP+ slots for Gigabit access and fiber 10G uplinks.

  • 12 Gigabit RJ45 ports and 4 flexible 1/10G SFP+ uplink slots
  • L3 IPv4/IPv6 management with static and default route support
  • G.8032 ERPS ring recovery in less than 20 ms
  • STP, RSTP, MSTP, LACP, and static link aggregation
  • 4K IEEE 802.1Q VLAN, QinQ, voice VLAN, and multicast VLAN
  • ACL, 802.1X, RADIUS, DHCP snooping, ARP inspection, and port isolation
  • Fanless aluminum housing with dual redundant 12-48VDC power input
  • -40°C to +80°C operating temperature and IP40 protection
  • Web, CLI, SSH, HTTPS, SNMP v1/v2c/v3, RMON, and NMS management
  • DIN-rail or desktop installation with five-year warranty

Managed 12-Port L3 Industrial Ethernet Switch with 4 SFP+ 10G Uplink, Dual DC, DIN-Rail

Managed 24-Port L3 Industrial Fiber Switch, 12 Gigabit RJ45, 8 SFP, 4 SFP+ 10G Uplink, DIN-Rail

Industrial Managed Switches

10G uplink switch, gigabit fiber switch, industrial managed switch, industrial network switch, L3 managed switch, rack mount switch

IS830-12E8F4F

12×10/100/1000M RJ45, 8×100/1000M SFP, and 4×1/10G SFP+ fiber slots, plus 1 RS232 console port and dual redundant DC power inputs.

  • 24-port industrial Ethernet switch with 12 Gigabit RJ45, 8 dual-speed SFP, and 4 1/10G SFP+ ports
  • L3 IPv4/IPv6 management with static routing and default routing
  • G.8032 ERPS recovery in less than 20 ms, plus STP/RSTP/MSTP
  • 598 Gbps switching capacity and 89.28 Mpps wire-speed forwarding
  • Dual redundant 12–48VDC Phoenix terminal power inputs
  • Fanless aluminum housing for -40°C to +80°C industrial environments
  • 4K VLAN, QinQ, Voice VLAN, LACP, ACL, QoS, and multicast management
  • HTTPS, SSH 2.0, SNMP v1/v2c/v3, LLDP, RMON, and remote diagnostics
  • DIN-rail or desktop installation, IP40 protection, and 5-year warranty

Managed 24-Port L3 Industrial Fiber Switch, 12 Gigabit RJ45, 8 SFP, 4 SFP+ 10G Uplink, DIN-Rail

Managed 36-Port L3 Managed Industrial Ethernet Switch with 8 Combo, 16 SFP, 4 SFP+ Rack-Mount

Industrial Managed Switches

10G uplink switch, gigabit ethernet switch, industrial managed switch, industrial network switch, L3 managed switch, rack mount switch

IS830-16E8C4F-B

8 combo ports supporting 10/100/1000Base-T RJ45 or 100/1000Base-X SFP, 16 Gigabit SFP ports, and 4 1/10G SFP+ uplink ports.

  • 8 combo Gigabit ports, 16 Gigabit SFP ports, and 4 dual-rate 1/10G SFP+ uplinks
  • Non-blocking wire-speed forwarding with 336Gbps switching capacity
  • L3 IPv4/IPv6 routing with OSPF, BGP, RIP, static routes, and inter-VLAN routing
  • ERPS ring recovery in less than 20ms, plus STP, RSTP, and MSTP
  • Dual AC/DC input design with AC priority, automatic DC switchover, and reverse-polarity protection
  • -40°C to +75°C fanless operation in a galvanized steel 1U rack-mount housing
  • 802.1X, ACL, IP Source Guard, RADIUS, port isolation, and IP-MAC-VLAN-port binding
  • Web, CLI, SSH, HTTPS, SNMPv1/v2c/v3, LLDP, RMON, and diagnostic tools
  • 5-year warranty with lifelong maintenance

Managed 36-Port L3 Managed Industrial Ethernet Switch with 8 Combo, 16 SFP, 4 SFP+ Rack-Mount

Managed 24-Port L3 Managed Industrial Ethernet Fiber Switch with 4 SFP+ 10G Uplink, DIN Rail

Industrial Managed Switches

10G uplink switch, DIN rail switch, gigabit ethernet switch, industrial managed switch, industrial network switch, L3 managed switch

IS830-20E4F

20 × 10/100/1000Base-T RJ45 data ports and 4 × 1/10G SFP+ fiber uplink slots, plus 1 × RS232 console port and dual redundant DC power inputs.

  • 20 Gigabit RJ45 ports with 4 dual-speed 1/10G SFP+ uplink slots
  • L3 IPv4/IPv6 management with static and default route support
  • ERPS ring recovery under 20 ms; STP/RSTP/MSTP supported
  • Up to 598 Gbps switching capacity and 89.28 Mpps forwarding rate
  • Dual redundant 12–48 VDC power inputs with reverse-polarity protection
  • Fanless aluminum alloy housing for -40°C to +80°C industrial environments
  • VLAN, QinQ, LACP, QoS, ACL, IGMP/MLD Snooping, and multicast VLAN support
  • HTTPS, SSH, CLI, SNMP v1/v2c/v3, LLDP, RMON, and ONV NMS management
  • DIN rail or desktop installation, IP40 protection, and 5-year warranty

Managed 24-Port L3 Managed Industrial Ethernet Fiber Switch with 4 SFP+ 10G Uplink, DIN Rail

Managed 28-port L3 managed industrial ethernet switch with 4 SFP+ 10G uplink rack mount, 24-Port Gigabit RJ45

Industrial Managed Switches

10G uplink switch, gigabit ethernet switch, industrial managed switch, industrial network switch, L3 managed switch, rack mount switch

IS830-24E4F-60W

24 × 10/100/1000Base-T RJ45 access ports plus 4 × 1/10G SFP+ fiber uplink slots, with 1 × RS232 console port and AC/DC redundant power inputs.

  • 24 Gigabit RJ45 access ports and 4 dual-speed 1/10G SFP+ uplink slots
  • Non-blocking wire-speed forwarding with 598 Gbps switching capacity
  • L3 IPv4/IPv6 management with static and default routing
  • ERPS ring recovery under 20 ms, plus STP, RSTP, and MSTP support
  • 4K IEEE 802.1Q VLAN, QinQ, Voice VLAN, LACP, QoS, ACL, and multicast control
  • 802.1X, RADIUS, IP-MAC-VLAN-Port binding, ARP inspection, and port isolation
  • Fanless aluminum housing with -40°C to +80°C operating temperature
  • AC priority with dual 12–48 VDC inputs, automatic power switching, and reverse-polarity protection
  • HTTPS, SSH, SNMP, LLDP, RMON, cable diagnosis, and one-key factory reset
  • Desktop or 19-inch 1U rack installation for industrial and network room deployments

Managed 28-port L3 managed industrial ethernet switch with 4 SFP+ 10G uplink rack mount, 24-Port Gigabit RJ45

Managed 28-port L3 managed industrial ethernet switch with 4 SFP+ 10G uplink dual AC rack mount

Industrial Managed Switches

10G uplink switch, gigabit ethernet switch, industrial managed switch, industrial network switch, L3 managed switch, rack mount switch

IS830-24E4F-B

24×10/100/1000Base-T RJ45 access ports and 4×1/10G SFP+ fiber uplink ports, with dual AC inputs, 12–48V DC backup, console, and fault alarm interfaces.

  • 24 Gigabit RJ45 access ports with 4 dual-speed 1/10G SFP+ uplinks
  • Layer 3 IPv4/IPv6 routing with static routing, OSPF, RIP, and BGP support
  • ITU-T G.8032 ERPS ring recovery in less than 20ms
  • VLAN, QinQ, Voice VLAN, IGMP Snooping, QoS, ACL, and LACP support
  • IEEE 802.1X, SSH, HTTPS, IP Source Guard, and IP-MAC-VLAN-port binding
  • Dual AC input with 12–48V DC backup and automatic power switchover
  • Fanless galvanized steel housing for -40°C to +75°C operation
  • Web, CLI, Console, Telnet, and SNMP v1/v2c/v3 management
  • 1U 19-inch rack-mount or desktop installation

Managed 28-port L3 managed industrial ethernet switch with 4 SFP+ 10G uplink dual AC rack mount

Managed 36-Port L3 Industrial Ethernet Switch with 24 Gigabit RJ45, 8 SFP, 4 SFP+ 10G Uplink, Rack-Mount

Industrial Managed Switches

10G uplink switch, gigabit ethernet switch, industrial managed switch, industrial network switch, L3 managed switch, rack mount switch

IS830-24E8F4F-60W

24 x 10/100/1000Base-T RJ45 ports, 8 x 100/1000Base-X SFP fiber slots, and 4 x 1/10G SFP+ uplink slots; all network ports support wire-speed forwarding.

  • 36 network ports: 24 Gigabit RJ45, 8 Gigabit SFP, and 4 dual-speed 1/10G SFP+ uplinks
  • Layer 3 management with IPv4/IPv6 management and static route forwarding
  • Non-blocking, wire-speed switching with 598Gbps switching capacity
  • ERPS ring recovery under 20ms and STP/RSTP/MSTP redundancy support
  • 4K VLAN, QinQ, Voice VLAN, LACP, QoS, ACL, and multicast management
  • 802.1X, RADIUS, DHCP Snooping, ARP inspection, port isolation, and IP-MAC binding
  • HTTPS, SSH 2.0, CLI, SNMP v1/v2c/v3, LLDP, RMON, and system logging
  • AC 100–240V input plus dual 12–48V DC inputs with automatic power switching
  • -40°C to +80°C operating temperature and galvanized metal 1U rack-mount housing
  • 5-year warranty with lifetime maintenance

Managed 36-Port L3 Industrial Ethernet Switch with 24 Gigabit RJ45, 8 SFP, 4 SFP+ 10G Uplink, Rack-Mount

Managed 52-port L3 managed industrial ethernet switch with 4 SFP+ 10G uplink rack mount

Industrial Managed Switches

10G uplink switch, gigabit ethernet switch, industrial managed switch, industrial network switch, L3 managed switch, rack mount switch

IS830-48E4F

48 × 10/100/1000Base-T RJ45 access ports plus 4 × 1/10G SFP+ fiber uplink slots; 1 console port, 1 alarm output, 1 AC input, and 2 DC inputs.

  • 48 Gigabit RJ45 access ports with 4 dual-speed 1/10G SFP+ uplinks
  • L3 management with IPv4/IPv6 management and static routing
  • ERPS ring recovery in less than 20 ms under specified conditions
  • STP, RSTP, MSTP, LACP, and static link aggregation support
  • IEEE 802.1Q VLAN, QinQ, Voice VLAN, multicast, QoS, and ACL policies
  • IEEE 802.1X, RADIUS, DHCP Snooping, ARP inspection, and port isolation
  • AC100–240V input plus dual 12–48VDC inputs with automatic backup switching
  • Fanless galvanized steel chassis for desktop or 19-inch 1U rack installation
  • Web, CLI, SNMP, SSH, LLDP, RMON, cable diagnosis, and system monitoring
  • -40°C to +80°C operating temperature range and five-year warranty

Managed 52-port L3 managed industrial ethernet switch with 4 SFP+ 10G uplink rack mount

Managed 52-Port L3 Industrial Ethernet Switch, 48 Gigabit RJ45, 4 SFP+ 10G Uplinks, Rack-Mount Fanless Design

Industrial Managed Switches

10G uplink switch, gigabit ethernet switch, industrial managed switch, industrial network switch, L3 managed switch, rack mount switch

IS830-48E4F-60W

48×10/100/1000Base-T RJ45 access ports, 4×1/10G SFP+ fiber uplink slots, 1×console port, alarm output, AC input, and 2×12–48V DC inputs.

  • 48×10/100/1000Base-T Gigabit RJ45 access ports with wire-speed forwarding
  • 4×1/10G SFP+ slots for high-capacity fiber uplinks
  • Layer 3 management with IPv4/IPv6 management and static routing
  • ERPS ring recovery under 20 ms, plus STP, RSTP, and MSTP
  • 802.1Q VLAN, Voice VLAN, QinQ, MAC-based VLAN, and protocol-based VLAN
  • ACL, 802.1X, RADIUS, DHCP Snooping, ARP inspection, and port isolation
  • Fanless galvanized steel housing for quieter, lower-maintenance operation
  • Built-in AC power with dual 12–48V DC inputs and automatic power switching
  • Web, CLI, SSH, HTTPS, and SNMP v1/v2c/v3 management options
  • 19-inch 1U rack installation, desktop placement, -40°C to +80°C operation, and 5-year warranty

Managed 52-Port L3 Industrial Ethernet Switch, 48 Gigabit RJ45, 4 SFP+ 10G Uplinks, Rack-Mount Fanless Design

Managed 36-Port L3 Industrial Fiber Switch with 24 SFP, 4 SFP+ 10G Uplink, 8 Gigabit RJ45, Rack-Mount

Industrial Managed Switches

10G uplink switch, gigabit fiber switch, industrial managed switch, industrial network switch, L3 managed switch, rack mount switch

IS830-8E24F4F-60W

8 × 10/100/1000Base-T RJ45 ports, 24 × 100/1000M SFP fiber slots, and 4 × 1/10G SFP+ fiber slots for Gigabit access and 10G uplink aggregation.

  • 36 data ports: 8 Gigabit RJ45, 24 Gigabit SFP, and 4 1/10G SFP+ slots.
  • Non-blocking wire-speed forwarding with 598Gbps switching capacity.
  • L3 routing with IPv4/IPv6 management, static routes, and inter-VLAN communication.
  • ERPS ring recovery under 20ms under specified network conditions, plus STP/RSTP/MSTP.
  • 4K VLAN, QinQ, Voice VLAN, LACP, ACL, QoS, and multicast management.
  • Fanless aluminum housing with -40°C to +80°C operating temperature range.
  • AC 100–240V input and dual 12V DC inputs with automatic backup switching.
  • HTTPS, SSH, SNMP v1/v2c/v3, CLI, LLDP, system logs, and cable diagnosis.
  • 6kV lightning protection and industrial EMC protection measures.
  • Desktop and 19-inch 1U rack-mount installation; 5-year warranty.

Managed 36-Port L3 Industrial Fiber Switch with 24 SFP, 4 SFP+ 10G Uplink, 8 Gigabit RJ45, Rack-Mount