Get Connected

wanglink website home page

DIN rail switch

Managed 12-Port Gigabit Industrial Ethernet Switch with 4 SFP Uplinks, L2+ Ring Redundancy

Industrial Managed Switches

DIN rail switch, gigabit ethernet switch, industrial managed switch, industrial network switch, IP40 switch, L2+ managed switch

IS700-12E4F

12 × 10/100/1000Base-T RJ45 copper ports and 4 × 100/1000Base-X SFP slots, plus RS232 console, dual DC power input, and fault alarm.

  • 12 gigabit RJ45 ports with 4 × 100/1000M SFP uplink slots
  • L2+ management with IPv4/IPv6 management and Layer 3 soft routing
  • ERPS ring recovery below 20 ms, plus STP/RSTP/MSTP support
  • Dual redundant 12-48 VDC power input with reverse-polarity protection
  • Fanless aluminum housing, IP40 protection, and -40°C to +80°C operation
  • VLAN, QinQ, Voice VLAN, QoS, ACL, IGMP/MLD snooping, and link aggregation
  • 802.1X, RADIUS, SSH 2.0, HTTPS, DHCP snooping, and ARP inspection
  • Web, CLI, SNMP v1/v2c/v3, LLDP, NMS, cable diagnosis, and system monitoring
  • DIN-rail or desktop installation with five-year warranty

Managed 12-Port Gigabit Industrial Ethernet Switch with 4 SFP Uplinks, L2+ Ring Redundancy

Managed Gigabit Industrial Ethernet Switch, 16-Port RJ45, L2+ Static Routing, ERPS <20 ms, DIN-Rail

Industrial Managed Switches

DIN rail switch, gigabit fiber switch, industrial managed switch, industrial network switch, IP40 switch, L2+ managed switch

IS700-16E

16 × 10/100/1000Base-T RJ45 data ports, 1 × RS232 console port, 2 × redundant 12-48VDC inputs and 1 × FAULT alarm interface.

  • 16 full gigabit 10/100/1000Base-T RJ45 ports with non-blocking wire-speed forwarding
  • L2+ management with IPv4/IPv6 management and static routing support
  • G.8032 ERPS ring protection with recovery time of less than 20 ms
  • STP, RSTP, MSTP, LACP and static link aggregation for resilient network design
  • 4K IEEE 802.1Q VLANs, Voice VLAN, QinQ, IGMP/MLD snooping and multicast VLAN
  • IEEE 802.1X, ACL, DHCP snooping, ARP inspection, port isolation and storm control
  • Fanless aluminum housing, DIN-rail or desktop installation and -40°C to +80°C operation
  • Dual redundant 12-48VDC power inputs with reverse-polarity protection
  • Web, CLI, SNMP v1/v2c/v3, SSH, HTTPS, LLDP, RMON and cable diagnostics

Managed Gigabit Industrial Ethernet Switch, 16-Port RJ45, L2+ Static Routing, ERPS <20 ms, DIN-Rail

Managed 12-Port Gigabit Industrial Ethernet Switch with 4 SFP Uplink, L2+ Routing, ERPS Ring

Industrial Managed Switches

DIN rail switch, gigabit ethernet switch, industrial managed switch, industrial network switch, IP40 switch, L2+ managed switch

IS700-16E4C8F-30W

20 × 10/100/1000Base-T RJ45 Gigabit data ports plus 4 × 100/1000Base-X SFP fiber uplink slots; 1 × RS232 console port and dual redundant DC input.

  • 20 × 10/100/1000Base-T RJ45 ports and 4 × 100/1000Base-X SFP slots
  • L2+ management with IPv4/IPv6 management and static route forwarding
  • ERPS ring recovery below 20 ms; STP, RSTP, and MSTP support
  • 802.1Q VLAN, QinQ, Voice VLAN, QoS, ACL, IGMP Snooping, and port aggregation
  • IEEE 802.1X, RADIUS, IP-MAC-VLAN-Port binding, DHCP Snooping, and port isolation
  • Dual redundant 12–48 VDC input with reverse-polarity protection
  • -40°C to +80°C operating temperature and galvanized metal housing
  • HTTPS, SSH, CLI, SNMP, LLDP, RMON, cable diagnosis, and one-key reset
  • Desktop or DIN-rail installation, with 5-year warranty and lifetime maintenance

Managed 12-Port Gigabit Industrial Ethernet Switch with 4 SFP Uplink, L2+ Routing, ERPS Ring

Managed 16-Port Full Gigabit Managed Industrial Ethernet Switch DIN Rail with 8 SFP Uplinks

Industrial Managed Switches

DIN rail switch, gigabit ethernet switch, industrial managed switch, industrial network switch, IP40 switch, L2+ managed switch

IS700-16E8F

16 × 10/100/1000Base-T RJ45 data ports and 8 × 100/1000Base-X SFP fiber uplink slots, with 1 × RS232 console port and redundant 12-48VDC power inputs.

  • 16 × 10/100/1000Base-T copper ports with 8 × 100/1000Base-X SFP uplink slots
  • Non-blocking, full wire-speed forwarding with 256 Gbps switching capacity
  • L2+ management with IPv4/IPv6 management and static routing
  • ERPS ring recovery under 20 ms, plus STP, RSTP, and MSTP support
  • 4K IEEE 802.1Q VLANs, Voice VLAN, QinQ, IGMP/MLD snooping, and multicast VLAN
  • ACL, 802.1X, RADIUS, DHCP snooping, ARP inspection, port isolation, and storm control
  • Fanless aluminum housing for -40°C to +80°C industrial operation
  • Redundant 12-48VDC Phoenix terminal power inputs with reverse-polarity protection
  • HTTPS, SSH, CLI, SNMP v1/v2c/v3, LLDP, RMON, logs, and cable diagnosis
  • DIN rail or desktop installation with 5-year warranty and lifelong maintenance

Managed 16-Port Full Gigabit Managed Industrial Ethernet Switch DIN Rail with 8 SFP Uplinks

Managed 20-Port Gigabit Industrial Ethernet Switch, 4 SFP Fiber Uplinks, L2+, ERPS, DIN-Rail

Industrial Managed Switches

DIN rail switch, gigabit ethernet switch, industrial managed switch, industrial network switch, industrial PoE switch, L2+ managed switch

IS700-20E4F

20 × 10/100/1000Base-T RJ45 data ports plus 4 × 100/1000Base-X SFP fiber slots; 1 × RS232 console port and dual redundant DC power inputs.

  • 20 × 10/100/1000Base-T RJ45 ports with non-blocking wire-speed forwarding
  • 4 × 100/1000Base-X SFP slots for single-mode or multimode fiber uplinks
  • L2+ management with IPv4/IPv6 management and static routing
  • G.8032 ERPS ring recovery below 20 ms under specified conditions
  • STP, RSTP, MSTP, LACP, VLAN, QinQ, QoS, ACL and multicast management
  • 802.1X, RADIUS, DHCP Snooping, ARP inspection and IP-MAC-VLAN-port binding
  • Fanless aluminum enclosure, dual redundant 12-48VDC input and DIN-rail mounting
  • HTTPS, SSH 2.0, CLI, SNMP v1/v2c/v3, LLDP and cable diagnostics
  • -40°C to +80°C operating temperature and 5-year warranty

Managed 20-Port Gigabit Industrial Ethernet Switch, 4 SFP Fiber Uplinks, L2+, ERPS, DIN-Rail

Managed 24-Port Gigabit Industrial Ethernet Switch, L2+ Routing, ERPS, DIN-Rail

Industrial Managed Switches

DIN rail switch, gigabit ethernet switch, industrial managed switch, industrial network switch, industrial PoE switch, L2+ managed switch

IS700-24E

24 × 10/100/1000Base-T RJ45 data ports, 1 × RS232 console port, fault relay, and dual 12–48VDC Phoenix power inputs.

  • 24 full gigabit RJ45 ports with auto-negotiation and wire-speed forwarding
  • L2+ management with IPv4/IPv6 management and static routing
  • ERPS ring recovery below 20ms, plus STP, RSTP and MSTP
  • 4K IEEE 802.1Q VLAN, Voice VLAN, QinQ and flexible port modes
  • ACL, 802.1X, IP-MAC-VLAN-Port binding, DHCP Snooping and ARP inspection
  • LACP and static link aggregation with up to 12 groups
  • Dual 12–48VDC redundant power inputs and fault alarm relay
  • Fanless aluminum enclosure, -40°C to +80°C operating temperature
  • Web, CLI, SSH and SNMP v1/v2c/v3 management options
  • Desktop or DIN-rail installation with 5-year warranty

Managed 24-Port Gigabit Industrial Ethernet Switch, L2+ Routing, ERPS, DIN-Rail

Managed 24-Port Gigabit Industrial Fiber Switch with 4 SFP Uplinks, L2+ Routing, ERPS and Rack Mount

Industrial Managed Switches

DIN rail switch, gigabit fiber switch, industrial managed switch, industrial network switch, IP40 switch, L2+ managed switch

IS700-24E2C2F-30W

24 × 10/100/1000Base-T RJ45 data ports plus 4 × 100/1000Base-X SFP fiber ports, including 2 combo port sets; 1 × RS232 console port.

  • 24 gigabit RJ45 access ports and 4 gigabit SFP fiber uplinks for mixed copper-fiber networks
  • L2+ management with IPv4/IPv6 management and static route forwarding
  • ERPS ring recovery below 20 ms under specified conditions, plus STP/RSTP/MSTP
  • 4K IEEE 802.1Q VLAN, QinQ, Voice VLAN, multicast VLAN, and flexible port modes
  • 802.1X, RADIUS, ACL, SSH 2.0, HTTPS, port isolation, and IP-MAC-VLAN-Port binding
  • Eight QoS queues per port with 802.1p/DSCP mapping and SP, WRR, or SP+WRR scheduling
  • Fanless aluminum housing, 19-inch 1U rack installation, and -40°C to +80°C operation
  • AC100-240V input plus dual DC12-48V inputs with reverse-polarity protection and automatic switching
  • 5-year warranty and lifelong maintenance support

Managed 24-Port Gigabit Industrial Fiber Switch with 4 SFP Uplinks, L2+ Routing, ERPS and Rack Mount

Managed Industrial Ethernet Switch, 20-Port Gigabit with 4 SFP Fiber Uplink, L2+ Routing, VLAN, QoS, Dual Power

Industrial Managed Switches

DIN rail switch, gigabit ethernet switch, industrial managed switch, industrial network switch, IP40 switch, L2+ managed switch

IS700-24E4F-30W

24 × 10/100/1000Base-T RJ45 access ports, 4 × 100/1000Base-X SFP fiber uplink slots, 1 console port, dual AC/DC power inputs and a fault relay port.

  • 24 gigabit RJ45 ports with 4 gigabit SFP fiber uplink slots
  • Non-blocking, full wire-speed forwarding with 192 Gbps switching capacity
  • L2+ management with IPv4 management, static routing and default routing
  • VLAN, QinQ, QoS, ACL, IGMP Snooping and link aggregation support
  • STP, RSTP and MSTP redundancy for fast link recovery
  • IEEE 802.1X, ACL, DHCP Snooping, ARP inspection and port isolation
  • Dual AC/DC power input with automatic DC backup switching
  • Fanless aluminum housing and -40°C to +80°C operating temperature
  • 6 kV lightning protection and industrial EMC protection
  • Desktop or 19-inch 1U rack installation, backed by a 5-year warranty

Managed Industrial Ethernet Switch, 20-Port Gigabit with 4 SFP Fiber Uplink, L2+ Routing, VLAN, QoS, Dual Power

Managed 14-Port Full Gigabit Industrial Ethernet Switch, 2 RJ45 + 12 SFP, L2+, DIN Rail

Industrial Managed Switches

DIN rail switch, gigabit ethernet switch, industrial managed switch, industrial network switch, IP40 switch, L2+ managed switch

IS700-2E12F

14 data ports: 2 × 10/100/1000Base-T RJ45 and 12 × 100/1000Base-X SFP fiber slots, plus 1 RS232 console port.

  • 2 × 10/100/1000Base-T RJ45 ports and 12 × 100/1000Base-X SFP slots
  • Full gigabit non-blocking wire-speed forwarding with 256 Gbps switching capacity
  • L2+ management with IPv4/IPv6 management and static software routing
  • ERPS ring recovery below 20 ms; supports STP, RSTP, and MSTP
  • IEEE 802.1Q VLAN, QinQ, voice VLAN, IGMP Snooping, ACL, QoS, and link aggregation
  • Dual redundant 12–48 VDC power input with reverse-polarity protection
  • Fanless aluminum housing, -40°C to +80°C operation, and DIN rail mounting
  • HTTPS, SSH, SNMP v1/v2c/v3, CLI, LLDP, RMON, logs, and cable diagnosis
  • 5-year warranty with lifelong maintenance support

Managed 14-Port Full Gigabit Industrial Ethernet Switch, 2 RJ45 + 12 SFP, L2+, DIN Rail

Managed 24-port 10G uplink L2+ industrial Ethernet switch with 8 SFP and 4 SFP+

Industrial Managed Switches

10G uplink switch, DIN rail switch, gigabit ethernet switch, industrial managed switch, industrial network switch, L2+ managed switch

IS730-12E4F

8×10/100/1000M RJ45 data ports, 24×100/1000M SFP fiber ports, 4×1/10G SFP+ ports, 1×RS232 console port, AC 100-240V input and 2×DC 12V backup inputs.

  • 24×100/1000M SFP fiber ports, 8×Gigabit RJ45 ports and 4×1/10G SFP+ ports
  • Non-blocking wire-speed switching with 598Gbps switching capacity and 107.14Mpps forwarding rate
  • ITU-T G.8032 ERPS ring recovery below 20 ms under specified conditions
  • IPv4/IPv6 management, static routing and inter-VLAN communication
  • 802.1Q VLAN, QinQ, Voice VLAN, LACP, QoS and Layer 2-4 ACL support
  • 802.1X, RADIUS, DHCP Snooping, ARP inspection and IP-MAC-VLAN-port binding
  • AC primary input with dual DC 12V backup inputs and reverse-polarity protection
  • Fanless aluminum housing, 1U 19-inch rack installation and -40°C to +80°C operation
  • HTTPS, SSH, CLI, SNMP v1/v2c/v3, LLDP, RMON and cable diagnosis
  • 6kV lightning protection, IP40 protection and five-year warranty

Managed 24-port 10G uplink L2+ industrial Ethernet switch with 8 SFP and 4 SFP+

Managed 20-port 10G uplink managed industrial ethernet switch with 4 SFP+ DIN rail | IS730-12E8F4F

Industrial Managed Switches

10G uplink switch, DIN rail switch, gigabit ethernet switch, industrial managed switch, industrial network switch, L2+ managed switch

IS730-12E8F4F

12×10/100/1000M RJ45 ports, 8×100/1000M SFP slots and 4×1/10G SFP+ uplink slots; all ports support wire-speed forwarding.

  • 12 Gigabit RJ45 ports, 8 Gigabit SFP slots and 4 dual-rate 1/10G SFP+ uplinks
  • Non-blocking, wire-speed forwarding with 598 Gbps switching capacity and 89.28 Mpps forwarding rate
  • ERPS ring recovery under 20 ms, plus STP, RSTP and MSTP redundancy
  • L2+ management with IPv4/IPv6 management and static route forwarding
  • 4K VLAN, QinQ, Voice VLAN, LACP, ACL, QoS and multicast management
  • 802.1X, RADIUS, DHCP Snooping, ARP inspection, port isolation and storm control
  • Fanless aluminum housing, dual redundant DC power inputs and -40°C to +80°C operation
  • DIN-rail or desktop installation, IP40 protection and five-year warranty

Managed 20-port 10G uplink managed industrial ethernet switch with 4 SFP+ DIN rail | IS730-12E8F4F

Managed 44-Port L3 Industrial Ethernet Fiber Switch with 4 SFP+ 10G Uplinks, 28 SFP Ports, Rack-Mount

Industrial Managed Switches

10G uplink switch, DIN rail switch, gigabit ethernet switch, industrial managed switch, industrial network switch, L3 managed switch

IS830-12E28F4F-60W

12×10/100/1000Base-T RJ45 ports, 28×100/1000Base-X SFP slots, and 4×1/10G SFP+ uplink slots, all supporting wire-speed forwarding.

  • 44-port design with 12 Gigabit RJ45, 28 Gigabit SFP, and 4 dual-rate 1/10G SFP+ ports.
  • 598 Gbps switching capacity and 119.04 Mpps wire-speed forwarding.
  • L3 static routing with IPv4/IPv6 management, VLAN, ACL, QoS, and link aggregation.
  • G.8032 ERPS recovery in less than 20 ms, plus STP, RSTP, and MSTP.
  • Dual 12 VDC inputs with reverse-polarity protection and automatic AC/DC changeover.
  • Operating temperature from -40°C to +80°C for demanding industrial locations.
  • Web, CLI, HTTPS, SSH, SNMP, LLDP, RMON, system log, and cable diagnosis support.
  • Galvanized steel 1U housing for desktop or 19-inch rack installation.

Managed 44-Port L3 Industrial Ethernet Fiber Switch with 4 SFP+ 10G Uplinks, 28 SFP Ports, Rack-Mount

Managed 12-Port L3 Industrial Ethernet Switch with 4 SFP+ 10G Uplink, Dual DC, DIN-Rail

Industrial Managed Switches

10G uplink switch, DIN rail switch, gigabit ethernet switch, industrial managed switch, industrial network switch, L3 managed switch

IS830-12E4F-B

12 × 10/100/1000Base-T RJ45 ports plus 4 × 1/10G SFP+ slots for Gigabit access and fiber 10G uplinks.

  • 12 Gigabit RJ45 ports and 4 flexible 1/10G SFP+ uplink slots
  • L3 IPv4/IPv6 management with static and default route support
  • G.8032 ERPS ring recovery in less than 20 ms
  • STP, RSTP, MSTP, LACP, and static link aggregation
  • 4K IEEE 802.1Q VLAN, QinQ, voice VLAN, and multicast VLAN
  • ACL, 802.1X, RADIUS, DHCP snooping, ARP inspection, and port isolation
  • Fanless aluminum housing with dual redundant 12-48VDC power input
  • -40°C to +80°C operating temperature and IP40 protection
  • Web, CLI, SSH, HTTPS, SNMP v1/v2c/v3, RMON, and NMS management
  • DIN-rail or desktop installation with five-year warranty

Managed 12-Port L3 Industrial Ethernet Switch with 4 SFP+ 10G Uplink, Dual DC, DIN-Rail

Managed Gigabit Industrial Ethernet Switch, 10 RJ45 Ports, 4 SFP Uplinks, L2+ Routing, ERPS, DIN-Rail

Industrial Managed Switches

DIN rail switch, gigabit ethernet switch, industrial managed switch, industrial network switch, IP40 switch, L2+ managed switch

IS700-10E4F

10 × 10/100/1000Base-T RJ45 ports and 4 × 100/1000Base-X Gigabit SFP uplink slots, with 1 RS232 console port and dual redundant DC power inputs.

  • 10 × 10/100/1000Base-T RJ45 access ports and 4 × 100/1000Base-X SFP fiber uplinks
  • L2+ management with IPv4/IPv6 management and static route forwarding
  • G.8032 ERPS ring recovery in less than 20 ms, plus STP, RSTP and MSTP
  • 4K VLAN, LACP, IGMP/MLD snooping, QoS and Layer 2 to Layer 4 ACL filtering
  • HTTPS Web, CLI, Console, SSH 2.0, Telnet and SNMP v1/v2c/v3 management
  • Dual redundant 12-48VDC power inputs with reverse-polarity protection and fault relay
  • Fanless aluminum housing, -40°C to +80°C operation, IP40 protection and DIN-rail mounting
  • 6 kV Ethernet port lightning protection, 5-year warranty and lifelong maintenance

Managed Gigabit Industrial Ethernet Switch, 10 RJ45 Ports, 4 SFP Uplinks, L2+ Routing, ERPS, DIN-Rail

Managed 16-Port Gigabit Industrial Ethernet Switch, 2 SFP Fiber Uplinks, L2+ Static Routing

Industrial Managed Switches

DIN rail switch, gigabit ethernet switch, industrial managed switch, industrial network switch, IP40 switch, L2+ managed switch

IS700-16E2F-30W

16 × 10/100/1000Base-T RJ45 data ports and 2 × 100/1000Base-X Gigabit SFP fiber uplink slots, with 1 RS232 console port.

  • 16 × 10/100/1000Base-T RJ45 gigabit access ports with wire-speed forwarding.
  • 2 × 100/1000Base-X SFP slots for fiber uplinks up to 120 km with suitable optical modules.
  • L2+ management with IPv4/IPv6 management and static route forwarding.
  • ERPS ring recovery under 20 ms, plus STP, RSTP and MSTP support.
  • 802.1Q VLAN, Voice VLAN, QinQ, link aggregation, IGMP/MLD snooping and multicast VLAN.
  • ACL, QoS, 802.1X, RADIUS, port isolation, storm control and IP-MAC-VLAN-Port binding.
  • Fanless aluminum housing, -40°C to +80°C operating temperature and IP40 protection.
  • AC100-240 V internal power with dual 12-48 VDC inputs and automatic power switching.
  • Desktop or 19-inch 1U rack installation, with five-year warranty and lifelong maintenance.

Managed 16-Port Gigabit Industrial Ethernet Switch, 2 SFP Fiber Uplinks, L2+ Static Routing

Managed 24-Port L3 Managed Industrial Ethernet Fiber Switch with 4 SFP+ 10G Uplink, DIN Rail

Industrial Managed Switches

10G uplink switch, DIN rail switch, gigabit ethernet switch, industrial managed switch, industrial network switch, L3 managed switch

IS830-20E4F

20 × 10/100/1000Base-T RJ45 data ports and 4 × 1/10G SFP+ fiber uplink slots, plus 1 × RS232 console port and dual redundant DC power inputs.

  • 20 Gigabit RJ45 ports with 4 dual-speed 1/10G SFP+ uplink slots
  • L3 IPv4/IPv6 management with static and default route support
  • ERPS ring recovery under 20 ms; STP/RSTP/MSTP supported
  • Up to 598 Gbps switching capacity and 89.28 Mpps forwarding rate
  • Dual redundant 12–48 VDC power inputs with reverse-polarity protection
  • Fanless aluminum alloy housing for -40°C to +80°C industrial environments
  • VLAN, QinQ, LACP, QoS, ACL, IGMP/MLD Snooping, and multicast VLAN support
  • HTTPS, SSH, CLI, SNMP v1/v2c/v3, LLDP, RMON, and ONV NMS management
  • DIN rail or desktop installation, IP40 protection, and 5-year warranty

Managed 24-Port L3 Managed Industrial Ethernet Fiber Switch with 4 SFP+ 10G Uplink, DIN Rail

Managed 16-Port Gigabit Industrial Fiber Switch, 8 RJ45 + 8 SFP, L2+ Routing, ERPS Ring, DIN-Rail

Industrial Managed Switches

DIN rail switch, gigabit fiber switch, industrial managed switch, industrial network switch, IP40 switch, L2+ managed switch

IS700-8E8F

8 × 10/100/1000Base-T RJ45 data ports and 8 × 100/1000Base-X SFP fiber uplink ports, all supporting auto-negotiation and wire-speed forwarding.

  • 8 gigabit RJ45 ports plus 8 100/1000M SFP fiber slots for flexible copper-to-fiber network expansion.
  • Full wire-speed forwarding with 256 Gbps switching capacity and 23.81 Mpps forwarding rate.
  • L2+ management with IPv4/IPv6 management, static routing, VLAN, QinQ, QoS, ACL, and port aggregation.
  • ERPS ring recovery below 20 ms, with STP, RSTP, and MSTP support for redundant network designs.
  • Fanless aluminum housing, -40°C to +80°C operating temperature, IP40 protection, and DIN-rail installation.
  • Dual redundant 12–48 VDC power input with reverse-polarity protection.
  • HTTPS, SSH, SNMP, CLI, LLDP, RMON, system logs, cable diagnosis, and NMS integration for remote maintenance.
  • Five-year warranty and lifelong maintenance support.

Managed 16-Port Gigabit Industrial Fiber Switch, 8 RJ45 + 8 SFP, L2+ Routing, ERPS Ring, DIN-Rail