Get Connected

wanglink website home page

PoE Switches

Explore our PoE switch range in 4 port, 5 port, 8 port, 16 port, 24 port, and 48 port configurations at competitive prices. Our collection includes PoE network switches, PoE++ powered switches, PoE Ethernet switches, and PoE gigabit switches ideal for IP cameras. We offer the best PoE switches including managed switches and various types of PoE switches. Understanding the meaning of PoE switches: they deliver data and power through one cable. Find your solution for powering IP cameras, access points, and network devices.

Request Bulk Pricing
Product Catalog Download
Digital Power Meter PoE SwitchesManaged PoE SwitchesPassive PoE SwitchesReverse PoE SwitchesUnmanaged PoE Switches

PoE Switch Selection Guide: Choose the Right Switch for Your Project

Product Category PoE Standard Power Architecture Power Monitoring Management Primary Application
DPM Series PoE Digital Power Display IEEE 802.3af/at/bt Standard PSE (Output to PDs) Digital Tube LED
Real-time dynamic wattage reading
 Unmanaged / Smart CCTV Surveillance, engineering projects requiring instant on-site load audits.
Reverse PoE Switch FTTB/MDU Multi-tenant Passive / 802.3af Reverse PD Input
Powered by end-users via uplink
 Port Power LEDs Unmanaged / Managed ISP corridor distribution where local AC grid power is unavailable or costly.
Passive PoE Switch Fixed Voltage Direct Feed Non-Standard (12V/24V/48V) Always-on DC output (No handshake) Basic Power/Link LEDs Unmanaged Low-cost wireless CPEs, proprietary 24V APs, fixed-voltage embedded devices.
Managed PoE Switch L2/L3 Enterprise Tier IEEE 802.3af/at/bt Standard PSE with remote scheduling Software-based
SNMP, Web GUI, CLI telemetry
 Full L2 / L2+ / L3
VLAN, QoS, PoE Watchdog, RSTP
 Enterprise campuses, hotels, hospitals, centralized network management.
Unmanaged PoE Switch Plug-and-Play Basic IEEE 802.3af/at Standard PSE Auto-negotiation Basic Power Budget LEDs Plug-and-Play
Optional DIP Switch (VLAN/Extend)
 SOHO, small IP camera deployments, smart home, zero-configuration nodes.

Comprehensive Ethernet Switching Solutions

  • How Does a Network Switch Work? A Practical Guide

    How Does a Network Switch Work? A Practical Guide

    Learn how a network switch forwards Ethernet frames, builds MAC tables, supports VLANs, PoE, redundancy, and connects modern business networks.

  • What Does a Network Switch Do? A Practical Guide

    What Does a Network Switch Do? A Practical Guide

    Learn what a network switch does, how it connects devices, and the differences between managed, unmanaged, PoE, and industrial Ethernet switches.

  • Holiday Notice: 2026 Mid-Autumn Festival & National Day

    Holiday Notice: 2026 Mid-Autumn Festival & National Day

    Dear Valued Customers, Thank you for your continuous support and trust in WangLink (Shenzhen Wanglink Communication Equipment Technology Co., Ltd.). We are writing to inform you of our office closure schedule for the upcoming Mid-Autumn Festival and National Day holidays, arranged in accordance with the official notice of the General Office of the State Council…

  • 11 topology 01 toll station 1600x900

    How Industrial PoE Switches Support Highway Toll-Station Surveillance

    Outdoor toll-station networks place cameras and wireless equipment in roadside cabinets where heat, moisture, electrical transients and distance affect uptime. This case study explains the PoE, uplink and cabinet checks behind a resilient highway surveillance design.

  • Substation SCADA network architecture showing bay-level IED access, fiber aggregation and a station controller

    How Industrial Switches Support Substation SCADA Networking

    A substation network must carry protection, measurement and control traffic through an electrically harsh environment. This case study explains the topology, switch-selection criteria and evidence required for an industrial SCADA deployment.

  • Wide-Temperature Industrial Switches Support Mission-Critical Networks in Mining Operations

    How Wide-Temperature Industrial Switches Support Mining Networks

    Mining networks connect control, monitoring and safety systems across areas that may be dusty, hot, cold or difficult to access. This case study explains how to document the environment, topology and validation evidence before selecting an industrial switch.

View the Most Effective Real-Application Case Studies of PoE Switches

Real deployments, real results. Explore how Wanglink PoE switches power surveillance, wireless coverage, and industrial networks across active sites worldwide—with topologies, configurations, and measurable outcomes you can reference for your own project.

View More Case
Get in Touch With Us Directly

Request a Quote or Consultation

Share a few details about your project — number of devices, deployment environment, power and distance requirements — and we’ll build the solution around them.

Tell us about:

  • Your specific product needs (e.g., PoE switches, 100G transceivers).
  • Estimated order volume or OEM/ODM requirements.
  • Any specific technical environment details.

Every inquiry is reviewed by our network engineers and account managers — you’ll receive a response within one business day.

Frequently Asked Questions about Ethernet Switches

A: These are the three generations of the PoE standard, differing mainly in power per port: 802.3af delivers up to 15.4W per port (enough for standard IP cameras), 802.3at (PoE+) up to 30W (PTZ cameras, high-power APs), and 802.3bt up to 60–90W (pan-tilt-zoom cameras, LED lighting, thin clients). All newer standards are backward compatible, so a 802.3bt switch can power 802.3af devices safely. Choose by adding up the power draw of your powered devices.

A: Add the maximum power consumption of every powered device (PD), then add a 20–30% safety margin for spikes and future expansion — this total must be within the switch’s PoE budget. For example, 16 cameras at 12W each = 192W; with margin, select a switch with at least a 240W budget. Also account for the switch’s own operating power if the whole rack runs on one circuit.

A: The digital tube LED shows the live total wattage draw of all connected devices at a glance — no laptop, no login. It lets installers instantly audit on-site load, verify the switch isn’t near its budget limit, and spot a faulty or power-hungry device during commissioning. This is especially valuable on CCTV projects where multiple trades share the same cabinet and load confirmation must happen on the spot.

A: Yes. A standard PSE (Power Sourcing Equipment) port runs a detection handshake before delivering power — it only powers devices that identify themselves as PoE-compatible, and leaves non-PoE devices (printers, PCs, analog equipment) untouched. This applies to the DPM, Managed and Unmanaged Series. The only exception is Passive PoE switches, which output power continuously — see Q7.

A: A Reverse PoE switch is powered through its uplink port by the device on the other end — typically a main switch or an end-user’s ONU/CPE — instead of drawing from a local AC outlet. It’s designed for FTTB/MDU multi-tenant buildings and ISP corridor distribution, where pulling local AC power to every floor is either impossible or too costly. The switch acts as a PD upstream and a standard PSE downstream, delivering power and data to corridor IP cameras or access points from a single remote source.

A: No local power supply is needed. The switch receives both data and DC power over its uplink cable from the feeding device, so installation is a single cable run per unit. Two points to verify before deployment: the uplink peer must be able to output power (choose the Passive or 802.3af version to match the feeding device), and the cabling distance must be within the supported transmission range.

A: Passive PoE switches are built for non-standard devices — proprietary 24V access points, low-cost wireless CPEs and fixed-voltage embedded devices that don’t support the 802.3af/at handshake. They deliver constant DC power on the data pairs the moment they’re powered on, which keeps these devices simple and cheap. The trade-off: the output voltage never negotiates, so you must confirm the connected device’s input voltage exactly matches the switch output (e.g., 24V device on a 24V port) before powering up.

A: Do not — unless the device’s input voltage matches the fixed output exactly. Standard PoE devices expect the handshake and may be damaged by a constant 24V or 48V feed. For mixed deployments (standard cameras plus proprietary APs), use a switch with per-port mode selection or standard PSE ports, or isolate the passive-fed devices on their own Passive PoE switch.

A: Full L2/L2+/L3 control: VLAN segmentation, QoS for voice and video priority, RSTP for loop protection, and PoE management including per-port power budgets, scheduling (power on/off by time), and PoE Watchdog — which automatically reboots a camera or AP that stops responding. Monitoring is available via SNMP, Web GUI and CLI telemetry, making it the right tier for campuses, hotels and hospitals that need centralized, remote network management.

A: Choose Unmanaged when you need plug-and-play reliability: small IP camera setups, smart home and zero-configuration nodes. The DIP-switch models add VLAN isolation and Extend mode (250m transmission at reduced speed) without any software. Choose Managed when you need remote control, security segmentation, power scheduling or fault recovery across a larger site — if you’re already running VLANs, monitoring or multiple locations, the management features will pay for themselves quickly.

How to Choose the Right PoE Switch: A Practical Selection Guide

Choosing a PoE switch looks simple — count the ports, match the budget — but the wrong pick costs real money: undersized power budgets, burned devices, and site visits to fix what should have been decided at the desk. This guide walks through the seven decisions that actually matter, and maps each one to the Wanglink product line.

Step 1: Inventory Your Powered Devices (PDs)

Before looking at any switch, list every device it will power:

  • Device type and count — IP cameras, wireless APs, VoIP phones, access control, LED lighting, thin clients
  • Max power draw per device — take the maximum rating from the datasheet, not the typical value (PTZ heaters and IR modes spike at night)
  • Power standard — standard (802.3af/at/bt) or proprietary (fixed 24V/48V, non-negotiated)
  • Cable distance — standard PoE reaches 100m; plan beyond that before you buy

This inventory drives every decision below.

Step 2: Choose the PoE Standard and Power Budget

Match the switch’s per-port standard to the most power-hungry device, and the total budget to the sum of all devices.

PoE StandardMax Power per Port (PSE)Typical Devices
IEEE 802.3af15.4WFixed IP cameras, VoIP phones, basic APs
IEEE 802.3at (PoE+)30WPTZ cameras, dual-band APs, video intercoms
IEEE 802.3bt (PoE++)60–90WHigh-end PTZ, LED lighting, thin clients, kiosks

All standards are backward compatible, so an 802.3bt switch safely powers 802.3af devices — the port just delivers what the device requests.

Budget formula: Total budget = Σ (PD max power) × 1.2–1.3 safety margin + switch overhead (≈5–10W)

Example: 16 cameras at 12W max = 192W. With 25% margin → 240W switch. Buying a “16-port” switch with a 150W budget for this job guarantees brownouts on nights when IR is on.

Step 3: Pick the Power Delivery Mode

This is where Wanglink differs from commodity switches. Three architectures exist because three real-world problems exist:

ModeHow Power Is DeliveredBest ForWatch Out
Standard PSE (af/at/bt)Handshake detection, power only to compatible PDsMost deploymentsNone — safest default
Passive PoEFixed 12V/24V/48V output, always on, no handshakeProprietary 24V APs, low-cost CPEs, fixed-voltage embedded devicesVoltage must match exactly — mismatch damages devices
Reverse PoESwitch is powered from the uplink peer (no local AC)FTTB/MDU corridors, ISP distribution where AC is unavailable or costlyConfirm the uplink feeder’s output type (Passive or 802.3af)

Rule of thumb: if a device is standard-compliant, feed it from a standard PSE port. Reserve Passive PoE for devices that genuinely need fixed-voltage feed. If your site has no usable AC at the switch location, Reverse PoE removes a whole electrical contracting job.

Step 4: Decide the Management Tier

Management is a feature you pay for once and use for years. Match the tier to the network, not the budget:

TierCapabilitiesRight For
UnmanagedPlug-and-play, optional DIP switch (VLAN isolation / Extend 250m)SOHO, small camera sites, zero-configuration nodes
Smart / DPMUnmanaged simplicity + real-time digital wattage displayCCTV projects requiring instant on-site load audits
Managed (L2/L2+/L3)VLAN, QoS, RSTP, PoE Watchdog, remote power scheduling, SNMP/Web/CLI telemetryCampuses, hotels, hospitals — centralized remote management

Two common mis-buys: buying Managed for a 4-camera site (management never gets used), and buying Unmanaged for a campus (every VLAN and reboot now means a truck roll). A useful question: will anyone need to touch this switch remotely after install? If yes, go Managed.

Step 5: Ports, Speed and Uplinks

  • Port count — leave 15–20% spare ports for expansion and for non-PoE devices (they share the switch)
  • Port speed — Gigabit for high-bandwidth cameras (4K/8MP streams) and dense AP zones; Fast Ethernet still fine for 2MP cameras and VoIP
  • Uplink — SFP fiber uplinks for runs beyond copper reach, inter-building links, and backbone aggregation; don’t daisy-chain three switches on one 100M uplink

Step 6: Plan for Distance

Standard PoE data limit is 100m (power can travel further, but data integrity is the constraint). For longer runs:

  • Extend mode (DIP switch on Unmanaged models): 250m transmission at reduced speed (10Mbps) — perfect for perimeter cameras
  • PoE Extenders: chain additional segments beyond 250m
  • Media Converters / SFP fiber: the right answer for 500m+ or inter-building links — no voltage-drop or data-integrity concerns at all

Rule: design the topology so the longest camera run fits one method end-to-end before ordering cable.

Step 7: Environment and Protection

  • Indoor vs industrial: outdoor cabinets, uncontrolled temperatures, and vibration-prone locations need industrial-rated switches with wide-temperature operation and higher surge immunity
  • Surge protection: PoE lines entering a building are lightning entry points — use switches with per-port surge protection, and confirm grounding at the cabinet
  • Cooling: PoE+ and PoE++ switches generate heat; in sealed cabinets, prefer fanless designs with adequate ventilation or industrial fan models

Wanglink Selection Map

Your ScenarioRecommended Series
CCTV project needing instant on-site load confirmationDPM Series — digital wattage display
FTTB/MDU corridor, no local AC availableReverse PoE Switch
Proprietary 24V APs / low-cost fixed-voltage CPEsPassive PoE Switch (12V/24V/48V)
Campus, hotel, hospital — centralized managementManaged PoE Switch (L2/L2+/L3)
SOHO, small camera site, zero-configurationUnmanaged PoE Switch
Run >100m (perimeter, long corridors)Extend mode or PoE Extender / Media Converter

Final 10-Point Checklist

  1. Device inventory complete, with max power values (not typical)
  2. Per-port standard ≥ most demanding device’s requirement
  3. Total budget ≥ Σ power × 1.2 margin
  4. Power delivery mode matches every device (standard / passive / reverse)
  5. Management tier matches who operates the network
  6. 15–20% spare ports
  7. Uplink speed and SFP plan for the backbone
  8. Every cable run within 100m, or Extend / Extender / fiber planned
  9. Environment rating fits cabinet, temperature and surge exposure
  10. Grounding and surge protection confirmed at installation

Three Mistakes That Cost the Most

  • Budget math on “typical” power — night-time IR, heaters and PTZ motors push devices to max; size on max
  • Feeding standard devices from passive ports — voltage mismatch destroys equipment; match the mode to the device
  • Ignoring the 100m rule at design time — retrofitting fiber or extenders after cabling is 5× the cost of planning it first